ArmorPlast® 75

Ballistic Glazing - Level 1

ARMORPLAST® 75 UL 752 LEVEL 1 BULLET RESISTANT

ArmorPlast® 75 ballistic grade sheet is a 0.750˝, 3-ply polycarbonate and acrylic laminate that meets the UL 752 Level 1 rating for 9mm ballistic attack. All ArmorPlast® products incorporate Polycarbonate Sheet produced for high optical quality in security glazing laminates.

Exterior surfaces have a proprietary AR hard coat that facilitates cleaning and resists marring, chemical, and graffiti attack. ArmorPlast® 75 sheet has a five (5) year Limited Product Warranty against coating failure, yellowing, and hazing. The terms of the warranty are available upon request.

ArmorPlast® 75 is suitable for schools, government, religious, and detention facilities, banks, specialty retailers, 24-hour convenience stores, cash transaction windows, and other vulnerable entry points.

Specifications

Gauge/Tolerance: 0.780 in ± 5%
Weight: 5.1 lbs./sq. ft.
Shading Coefficient: .89
U-Value: 0.65
Light Transmittance: 88%

THREE LEVELS OF PROTECTION | YOU’RE BUYING TIME

30 Sec – 1 Minute

Security film’s time delay is comparable to
scissor gates, bars, and roll-down shutters

GOOD

AP25 Access Denial

No Entry

BETTER

No Entry + Bullet Resistant

BEST

Frequently Asked questions

What sizes are available?

Riot Glass® (RG) and ArmorPlast® (AP) are available in maximum sizes 72″ x 120″. If window openings exceed that size, we simply reconfigure the mullions using our AP Series support mullions specifically designed to accommodate our AP and RG Framing. RG Security Laminates (our exclusive line of security window film) is available in 72″ maximum widths at any length.

Will it look like my existing glass?

Riot Glass®, ArmorPlast®, and RG Security Laminates all look like regular glass. Depending on the thickness, visual acuity can be slightly affected, but overall you won’t see a distinguishable difference. Yellowing is not a concern and is covered by the warranty. For added safety, all three products allow police and patrol services to see inside your property. Privacy tints are available as an option in most Riot Glass® products.

How do I clean and care for security glass?

Traditional cleaning methods work on all types of Riot Glass® security glass and laminates. All of our security glass products have a protective outer layer to avoid scratching and marring. The process is similar to caring for a new car. You put it through all kinds of paces every day, but you do so with care and attention to detail. Treat security glass the way you would the finish on a fine automobile and you’ll enjoy years of trouble-free service. Always follow the cleaning instructions that come with your Riot Glass® purchases for optimal product longevity.

What is the warranty on the glass and framing?

Warranties vary by product and can also change depending on whether the application is commercial or residential. In some cases, our products carry a limited lifetime warranty, while others are protected for up to 15 years. Your security specialist will provide details on both warranty coverage and life expectancy for your specific product needs.

How do I know it will work?

All of our products have been thoroughly tested in highly accredited laboratory settings and, more importantly, in real-world situations. While there are no ironclad guarantees, every retail store, commercial building, school, and home needs some level of security glass protection. Security glazing products are designed to delay and deter, and in many cases are the determining factor between life and death.

What happens during a site inspection?

Our security specialists will do a complete threat assessment, discuss your goals, and provide a detailed, easy-to-read proposal. We will also measure your windows and frames, then evaluate the overall condition and retrofit adaptability to determine the best solution for your property.

Do I need to remove signage and graphics?

It depends on which product you select and where the graphics are displayed. During the site inspection, our expert security consultant will advise whether graphics must be removed and replaced or stay intact.

What is UL 752? What’s the difference between ballistic and non-ballistic ratings?

Underwriters Laboratories™ offers multiple ballistic rating levels. Designed to measure bullet resistance, ballistic ratings factor in the grain (weight), caliber, and velocity of the ammunition. Non-ballistic (containment grade) products allow bullet penetration, but won’t break down or appreciably diminish in strength. In other words, the bullets leave holes, but the panels remain intact, keeping intruders out of the building.

HOW CAN WE HELP YOU?

Contact us

17941 Brookshire Lane
Huntington Beach, CA 92647
(800) 580-2303
info@riotglass.com

Interested in becoming a dealer?
Email us: info@riotglass.com

AP 100

AP 125

AP 125MS

AP 25

AP 375

AP 50

AP 75

ArmorPlast® Gen I Series

ArmorPlast® Gen II Series

ArmorPlast® IGU Series

J Series

RG2

RG3

RG4

RG5

RG5 MH

RG7

Forced Entry

Bulletproof Protection

Hurricane & Windstorm

Energy Efficiency

Blast Mitigation

Sound Attenuation

Philadelphia Looting: Here’s How to Protect Your Business

How To Reinforce Commercial Windows Without a Glass Price Increase That Breaks the Bank

Loss Prevention Innovations: Smash-and-Grab-Proof Windows

Innovative Architectural Solutions: Security Glass

Continuing Education for Architecture: Security Glass Topics and More

Glass Door Security Options for Commercial Entrances